ҳ>>׼ݿ>>ISO1?????page=1׼ ղرվ Ϊҳ
׼ָ
      ӭٱ׼ϢǿΪ١ݵṩйұ׼϶й׼Ҫ뼰ʱϵ
ѯ绰
010-51265117
51265117-806
ͻ䣺
china_isovip@126.com
׼ݼ
  ISO (ʱ׼֯)
  ITU (ʵ)
  EN (ŷޱ׼)
  IEC (ʵ繤ίԱ)
  CAC (ʳƷίԱ׼)
  ECSS (ŷ޺ձ׼Э֯)
  AFNOR (׼Э)
  ANSI (ұ׼)
  BIS (ӡȱ׼)
  BSI (Ӣ׼)
  CSA (ô׼Э)
  DIN (¹׼)
  GB (л񹲺͹׼)
  GBZ (ְҵȫ׼)
  GJB (Ҿñ׼)
  GOST (˹ұ׼)
  JJF ( Ҽ춨淶)
  JJG (Ҽ춨)
  JIS (ձ׼)
  GBJ (ҹ̽׼)
  AA (Э׼)
  AATCC(֯ѧӡȾЭ)
  ABMA (Э)
  ACI (ѧ)
  AGA (úЭ׼)
  AGMA (Э)
  AIA (칤ҵЭ)
  AIAA (պѧ)
  AIIM (ϢͼЭ)
  AOAC (ٷѧʦЭ)
  API (ʯѧ)
  ARI (յЭ)
  ASA (ѧЭ)
  ASME (еʦЭ)
  ASQC (Э)
  ASTM (ϺʵЭ)
  AWS (Э)
  CFR ()
  EIA (ӹҵЭ)
  FED ([]׼)
  ICAO (֯)
  JIS-(ձҵ׼)
  MIL (ñ׼)
  MSS żҵ׼
  NASA ([]Һպ)
  NFPA (ȫЭ)
  NISO ([]ȫϢ׼֯)
  NSF ([]ȫ)
  SAE (еʦЭ)
  SSPC ([]ͿЭ)
  TIA ([]ͨŹҵЭ׼)
  UL (ʵ)
ISO1?????page=1׼
自定义搜索
׼ѯ     
׼ ׼ ׼Ӣ
  Heat-treated steel tapping screws Mechanical properties - Third Edition
ISO 2702-2011
  Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications - Fifth Edition
ISO 2559-2011
  Paints and varnishes Determination of flow time by use of flow cups - Fifth Edition
ISO 2431-2011
  Fork-lift trucks Hook-on type fork arms and fork arm carriages Mounting dimensions - Fourth Edition
ISO 2328-2011
  Isoprene rubber (IR) Non-oil-extended, solution-polymerized types Evaluation procedures - Fifth Edition
ISO 2303-2011
  Metal slitting saws with fine and coarse teeth Metric series - Second Edition
ISO 2296-2011
  Machine Bridge Reamers - Second Edition
ISO 2238-2011
  Anodizing of aluminium and its alloys Determination of mass per unit area (surface density) of anodic oxidation coatings Gravimetric method - Third Edition
ISO 2106-2011
  Slotted raised countersunk head screws Product grade A - Fourth Edition
ISO 2010-2011
  Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity - Third Edition
ISO 1853-2011
  Rubber, vulcanized or thermoplastic Determination of shear modulus and adhesion to rigid plates Quadruple-shear methods - Fourth Edition
ISO 1827-2011
  Dentistry Shanks for rotary instruments Part 1: Shanks made of metals - Second Edition
ISO 1797-1-2011
  End mills and slot drills Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks - Third Edition
ISO 1641-3-2011
  End mills and slot drills Part 2: Dimensions and designation of milling cutters with Morse taper shanks - Second Edition
ISO 1641-2-2011
  Slotted pan head screws Product grade A - Third Edition
ISO 1580-2011
  Slotted raised countersunk (oval) head tapping screws - Second Edition
ISO 1483-2011
  Slotted countersunk (flat) head tapping screws - Second Edition
ISO 1482-2011
  Slotted pan head tapping screws - Second Edition
ISO 1481-2011
  Hexagon head tapping screws - Second Edition
ISO 1479-2011
  Rubber Determination of solvent extract - Fourth Edition
ISO 1407-2011
  Slotted cheese head screws Product grade A - Third Edition
ISO 1207-2011
  Geometrical product specifications (GPS) Series of conical tapers and taper angles - Third Edition
ISO 1119-2011
  Plastics Symbols and abbreviated terms Part 2: Fillers and reinforcing materials - Third Edition
ISO 1043-2-2011
  Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics - Fourth Edition
ISO 1043-1-2011
  Rubber, vulcanized or thermoplastic Determination of adhesion to metal Two-plate method - Fifth Edition
ISO 814-2011
  Rubber, vulcanized or thermoplastic Determination of low-temperature brittleness - Third Edition
ISO 812-2011
  Hydrometry Vocabulary and symbols - Fifth Edition
ISO 772 -2011
  Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings - Fourth Edition
ISO 544-2011
  Paper and board Determination of thickness, density and specific volume - Fourth Edition
ISO 534-2011
  Machine chucking reamers with cylindrical shanks and Morse taper shanks - Second Edition
ISO 521-2011
  Metallic materials Calibration of force-proving instruments used for the verification of uniaxial testing machines - Fourth Edition
ISO 376-2011
  Belt drives Pulleys Quality, finish and balance - Fourth Edition
ISO 254-2011
  Rubber, vulcanized or thermoplastic Accelerated ageing and heat resistance tests - Fifth Edition
ISO 188-2011
  Natural rubber latex concentrate Determination of alkalinity - Sixth Edition
ISO 125-2011
  Latex, rubber Determination of total solids content - Sixth Edition
ISO 124-2011
  Rolling bearings Radial bearings Boundary dimensions, general plan - Third Edition
ISO 15-2011
  Non-invasive sphygmomanometers Part 2: Clinical validation of automated measurement type TECHNICAL CORRIGENDUM 1 - First Edition
ISO 81060-2 CORR 1-2011
  Ships and marine technology Ship recycling management systems Guidelines for the implementation of ISO 30000 - First Edition
ISO PAS 30004-2011
  Information technology C UPnP device architecture C Part 18-13: Remote Access Device Control Protocol C Remote Access Transport Agent Configuration Service - First Edition
ISO 29341-18-13-2011
  Information technology C UPnP device architecture C Part 17-1: Quality of Service Device Control Protocol C Level 3 C Quality of Service Architecture - First Edition
ISO 29341-17-1-2011
3936ҳ 1277/3936 ÿҳʾ40/157440 ҳ һҳ һҳ ĩҳ